Ultrasabers Archon 3.1 With Diamond Controller RGBA Custom Lightsaber Star Wars

  
It is a fantastic saber in excellent condition (it's only ever been on display) and the diamond controller is simply one of the best boards you can have in a saber. Custom hilt specs : It has a silver non-illuminated switch fitted and has been fitted with an in-hilt recharge port. The charger is included and I will also include a micro USB cable for connecting it to your pc/mac. The blade is a 36 inch Ultrasabers Ultraedge mid-grade blade which is suitable for tricks and light sparring but not full contact combat. It has a few scuffs from being used on another saber briefly but no cracks. I'll run through a few key features below but you can see the full capability of the diamond controller along with demonstration videos on Ultrasabers website and you can also download the pc/mac software to manage the saber. Synchronized sound and light effects which means you can have one light effect for your hum sound and a completely different light effect for your power on sound and a completely different light effect for your power down, swing, clash, spin, and stab sounds. Advanced motion detection with adjustable sensitivity for: Swing, Clash, Spin, Stab, and Force. Gesture recognition with the ability to learn new gestures from the user through the on-board menu. Hold & cycle through up to 10 soundfonts through the on-board menu without connecting to a computer with up to 15 effects per font (up to 15 different sounds for Swing, Stab, Spin and Clash effects). 256 MB internal memory (compared to 16MB found on our V4 soundboards). 4-channel color mixer (Power LED) gives you the ability to adjust the current on 4 individual channels that control 4 different colors (for example Red, Green, Blue, and Amber) and mix and match any of these adjusted channels to create almost limitless possibilities for different blade colors. 4 additional independent low-power Accent LED channels which means you can add an illuminated AV switch without having it always on or sacrificing one of the main LED channels. And three additional Accent LEDs for DIY users. 8 bit light intensity control on each channel, generating more than 16 million colors. Gives you the ability to turn on/off a pulse mode so you can constantly pulse between two different custom colors.

Gives you the ability to adjust the time and duration of the all light effects which means you can create an unlimited variety and combination of pulses, flickers, shimmer across every sound effect (not just flash on clash). Gives you the ability to have a Flash on Clash of ANY COLOR with any main color blade. No more color blending during FoC and no more limitations on the combinations.

Throw the FoC Chart in the garbage and expand to unlimited possibilities. Battery monitor with 2 warning thresholds on any accent LED (for DIY users). Accepts both LSU and WAV sound format (mono, 16 bit, 48 kHz).

Fully configurable firmware, upgradable through the Ultrasabers Launcher software. Gives you the ability to make all these changes DYNAMICALLY, no DIP switch adjustments, no loading bar, no SD Card, no pin adjusting, no waiting. UK buyers only due to the size of the item.

Feel free to ask any questions, thanks for looking. The item "Ultrasabers Archon 3.1 With Diamond Controller RGBA Custom Lightsaber Star Wars" is in sale since Sunday, June 17, 2018.

This item is in the category "Collectables\Science Fiction Collectables\Star Wars Collectables\Other Star Wars". The seller is "thedim1" and is located in Leighton Buzzard. This item can be shipped to United Kingdom.

• Sub-Genre: Star Wars (1977)
• Series/ Genre: Star Wars